Updated
This is part 1 of a 4-part series on growing microgreens in your Flex Micro. Set up your lights, pump, water, pH, and nutrients so your microgreens are ready to seed.
Before using pH Down, the pH test kit or nutrients, read their Safety Data Sheets.
We highly recommend virtually planning and tracking your microgreens in the Flex Micro with the Flex Micro Virtual Manager Tool!
Once the microgreens are seeded and the tray is placed in the Flex Micro, the growing process becomes mostly hands-off. Most microgreens are typically ready to harvest 7 to 14 days from seed.
Before placing a tray of microgreen seeds in your Flex Micro, make sure it is set up as described in Setting up your Flex Micro, with the pump on for 15 minutes every 12 hours, a non-perforated tray in every unused slot, and the light off on any tier without uncovered, growing plants.
Check the tank's water, nutrient, and pH levels at least twice a week as described in Flex Micro Deep Clean and Weekly Maintenance.
Depending on the number of plants in your Flex Micro, you may need to add 2–8 gallons of water each week. For convenience, use a hose to refill the tank, or a pitcher if a hose isn’t available. Always use potable water.
Your microgreens are now ready to be seeded. Well done! Continue to Seeding Microgreens (Part 2 of 4) for next steps.